Eaton DA1 Variable frequency drive | 169096 概述

规格

常用规格

Product Name	Eaton DA1 Variable frequency drive
Catalog Number	169096
Product Length/Depth	204 mm
Product Height	273 mm
Product Width	131 mm
Product Weight	3.5 kg
Certifications	IEC/EN61800-3 UkrSEPRO CSA-C22.2 No. 14 IEC/EN 61800-3 CUL UL 508C UL Category Control No.: NMMS, NMMS7 UL report applies to both US and Canada Certified by UL for use in Canada RCM CE RoHS, ISO 9001 EAC Specification for general requirements: IEC/EN 61800-2 UL UL File No.: E172143 Safety: EN 61800-5-1: 2003 IEC/EN61800-5
Catalog Notes	The brake resistors are assigned based on the maximum rated power of the variable frequency drive. Additional brake resistors and designs (e.g. different duty cycles) are available upon request.

产品规格

Product Category	Variable frequency drives
Features	Parameterization: Fieldbus Parameterization: Keypad Parameterization: drivesConnect Parameterization: drivesConnect mobile (App)
10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
10.2.2 Corrosion resistance	Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects	Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard's requirements.
10.2.5 Lifting	Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions	Meets the product standard's requirements.
10.3 Degree of protection of assemblies	Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances	Meets the product standard's requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Is the panel builder's responsibility.
10.8 Connections for external conductors	Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength	Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage	Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material	Is the panel builder's responsibility.
Fitted with:	Brake chopper 7-digital display assembly PC connection Internal DC link Control unit Breaking resistance Radio interference suppression filter IGBT inverter Additional PCB protection
Climatic proofing	< 95 average relative humidity (RH), no condensation, no corrosion
Connection to SmartWire-DT	In conjunction with DX-NET-SWD1 SmartWire DT module Yes
Operating mode	Optional: Vector control with feedback (CLV) U/f control Speed control with slip compensation Sensorless vector control (SLV)
Frame size	FS3
Altitude	Above 1000 m with 1 % derating per 100 m Max. 1000 m Max. 4000 m
Environmental class	3C2, 3S2 (Air quality)
Application in domestic and commercial area permitted	Yes
Mains switch-on frequency	Maximum of one time every 30 seconds
Application in industrial area permitted	Yes
Ambient operating temperature - max	50 °C
Ambient operating temperature - min	-10 °C
Ambient operating temperature at 150% overload - max	50 °C
Ambient operating temperature at 150% overload - min	-10 °C
Ambient storage temperature - max	60 °C
Ambient storage temperature - min	-40 °C
Apparent power at 230 V	7.17 kVA
Apparent power at 240 V	7.48 kVA
Assigned motor current IM at 220 - 240 V, 60 Hz, 150% overload	15.2 A
Assigned motor current IM at 230 V, 50 Hz, 150% overload	14.8 A
Mounting position	Vertical
Relative symmetric net frequency tolerance	10 %
Relative symmetric net voltage tolerance	10 %
Protection	Finger and back-of-hand proof, Protection against direct contact (BGV A3, VBG4)
Resolution	0.1 Hz (Frequency resolution, setpoint value)
Static heat dissipation, non-current-dependent Pvs	0 W
Switch-on threshold for the braking transistor	390 VDC
Voltage rating - max	240 VAC
Communication interface	OP-Bus (RS485), built in EtherCAT, optional CANopen®, built in SmartWire-DT, optional Modbus RTU, built in Modbus-TCP, optional PROFIBUS, optional DeviceNet, optional Ethernet IP, optional PROFINET, optional
Converter type	U converter
Degree of protection	IP20 NEMA Other
Protocol	EtherNet/IP CAN MODBUS PROFINET IO Other bus systems DeviceNet PROFIBUS TCP/IP
Assigned motor power at 230/240 V, 60 Hz, 1-phase	5 HP
System configuration type	AC supply systems with earthed center point
Electromagnetic compatibility	1st and 2nd environments (according to EN 61800-3)
Braking resistance	20 Ω
Equipment heat dissipation, current-dependent Pvid	160 W
Heat dissipation capacity Pdiss	0 W
Heat dissipation per pole, current-dependent Pvid	0 W
Input current ILN at 150% overload	20.9 A
Braking torque	Max. 30 % MN, Standard - Main circuit Max. 100 % of rated operational current Ie, variable, DC - Main circuit Max. 100 % of rated operational current Ie with external braking resistor - Main circuit
Cable length	150 m, unscreened, maximum permissible, Motor feeder C3 ≤ 25 m, Radio interference level, maximum motor cable length 100 m, screened, maximum permissible, Motor feeder 200 m, screened, with motor choke, maximum permissible, Motor feeder C2 ≤ 5 m, Radio interference level, maximum motor cable length 300 m, unscreened, with motor choke, maximum permissible, Motor feeder
Functions	4-quadrant operation possible
Output voltage (U2)	240 V AC, 3-phase 230 V AC, 3-phase
Number of inputs (analog)	2
Number of inputs (digital)	5
Radio interference class	C2, C3: depending on the motor cable length, the connected load, and ambient conditions. External radio interference suppression filters (optional) may be necessary. Optional external radio interference suppression filter for longer motor cable lengths and for use in different EMC environments
Number of outputs (digital)	2
Starting current - max	200 %, IH, max. starting current (High Overload), for 4 seconds every 40 seconds, Power section
Number of phases (input)	3
Number of relay outputs	2 (parameterizable, 1 N/O and 1 changeover contact, 6 A (250 V, AC-1) / 5 A (30 V, DC-1))
Number of phases (output)	3
Power consumption	160W
Rated control supply voltage	10 V DC (Us, max. 10 mA)
Efficiency	96 % (η)
Rated control voltage (Uc)	24 V DC (external, max. 100 mA)
Supply frequency	50/60 Hz
Leakage current at ground IPE - max	0.93 mA
Mains voltage - max	240 V
Mains voltage - min	200 V
Nominal output current I2N	18 A
Number of HW-interfaces (industrial ethernet)	0
Number of HW-interfaces (other)	0
Number of HW-interfaces (parallel)	0
Number of HW-interfaces (RS-232)	0
Number of HW-interfaces (RS-422)	0
Number of HW-interfaces (RS-485)	1
Number of HW-interfaces (serial TTY)	0
Number of HW-interfaces (USB)	0
Number of interfaces (PROFINET)	0
Number of outputs (analog)	2
Output at linear load at rated output voltage - max	4 kW
Output at quadratic load at rated output voltage - max	4 kW
Output frequency - max	500 Hz
Output frequency - min	0 Hz
Output voltage - max	250 V
Overload current IL at 150% overload	27 A
Suitable for	Branch circuits, (UL/CSA)
Switching frequency	16 kHz, 4 - 24 kHz adjustable (audible), fPWM, Power section, Main circuit
Rated operational voltage	230 V AC, 3-phase 240 V AC, 3-phase
Short-circuit protection rating	30 A, UL (Class CC or J), Safety device (fuse or miniature circuit-breaker), Power Wiring
Rated frequency - max	62 Hz
Rated frequency - min	48 Hz
Rated operational current (Ie) at 150% overload	18 A
Rated operational current for specified heat dissipation (In)	18 A
Rated operational power at 220/230 V, 50 Hz, 1-phase	4 kW
Safety function/level	STO (Safe Torque Off, SIL2, PLc Cat 2)
Heat dissipation at current/speed	109 W at 50% current and 50% speed 122 W at 50% current and 90% speed 172 W at 100% current and 0% speed 175 W at 100% current and 50% speed 178 W at 100% current and 90% speed 75 W at 25% current and 0% speed 86 W at 25% current and 50% speed 91 W at 50% current and 0% speed

为合作而设

查询可适配本产品的其它伊顿产品或部件。

169096

常用规格

产品规格

导出产品规格

Installation videos

产品手册

产品样本

图纸

应用程序说明

为合作而设