Eaton DA1 Variable frequency drive | 176966 概述

规格

常用规格

Product Name	Eaton DA1 Variable frequency drive
Catalog Number	176966
Product Length/Depth	240 mm
Product Height	450 mm
Product Width	173 mm
Product Weight	11.5 kg
Certifications	Specification for general requirements: IEC/EN 61800-2 UL Category Control No.: NMMS, NMMS7 IEC/EN 61800-3 IEC/EN61800-3 Certified by UL for use in Canada IEC/EN61800-5 RoHS, ISO 9001 UL CE CSA-C22.2 No. 14 RCM UL File No.: E172143 UL report applies to both US and Canada DNV EAC UkrSEPRO CUL Safety: EN 61800-5-1: 2003 UL 508C
Catalog Notes	The brake resistors are assigned based on the maximum rated power of the variable frequency drive. Additional brake resistors and designs (e.g. different duty cycles) are available upon request.

产品规格

Product Category	Variable frequency drives
Features	Parameterization: Fieldbus Parameterization: Keypad Parameterization: drivesConnect Parameterization: drivesConnect mobile (App)
10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
10.2.2 Corrosion resistance	Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects	Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard's requirements.
10.2.5 Lifting	Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions	Meets the product standard's requirements.
10.3 Degree of protection of assemblies	Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances	Meets the product standard's requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Is the panel builder's responsibility.
10.8 Connections for external conductors	Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength	Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage	Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material	Is the panel builder's responsibility.
Fitted with:	Control unit Breaking resistance OLED display Brake chopper Additional PCB protection PC connection IGBT inverter Internal DC link
Climatic proofing	< 95 average relative humidity (RH), no condensation, no corrosion
Connection to SmartWire-DT	Yes In conjunction with DX-NET-SWD1 SmartWire DT module
Operating mode	U/f control Speed control with slip compensation Optional: Vector control with feedback (CLV) Sensorless vector control (SLV)
Frame size	FS4
Altitude	Above 1000 m with 1 % derating per 100 m Max. 4000 m Max. 1000 m
Environmental class	3C2, 3S2 (Air quality)
Application in domestic and commercial area permitted	Yes
Mains switch-on frequency	Maximum of one time every 30 seconds
Application in industrial area permitted	Yes
Ambient operating temperature - max	40 °C
Ambient operating temperature - min	-10 °C
Ambient operating temperature at 150% overload - max	40 °C
Ambient operating temperature at 150% overload - min	-10 °C
Ambient storage temperature - max	60 °C
Ambient storage temperature - min	-40 °C
Apparent power at 600 V	29.1 kVA
Mounting position	Vertical
Relative symmetric net frequency tolerance	10 %
Relative symmetric net voltage tolerance	10 %
Protection	Finger and back-of-hand proof, Protection against direct contact (BGV A3, VBG4)
Heat dissipation details	Operation (with 150 % overload)
Rated operational power at 525 V, 50 Hz, 3-phase	18.5 kW
Resolution	0.1 Hz (Frequency resolution, setpoint value)
Static heat dissipation, non-current-dependent Pvs	0 W
Switch-on threshold for the braking transistor	975 VDC
Voltage rating - max	600 VAC
Communication interface	Ethernet IP, optional EtherCAT, optional PROFINET, optional SmartWire-DT, optional CANopen®, built in OP-Bus (RS485), built in DeviceNet, optional Modbus-TCP, optional Modbus RTU, built in PROFIBUS, optional
Converter type	U converter
Degree of protection	IP55 NEMA 12
Protocol	MODBUS PROFIBUS CAN EtherNet/IP PROFINET IO DeviceNet Other bus systems TCP/IP
Assigned motor current IM at 500 V, 50 Hz, 150% overload	28 A
Assigned motor current IM at 525 V, 50 Hz, 150% overload	27.6 A
Assigned motor current IM at 550 - 600 V, 60 Hz, 150% overload	27 A
System configuration type	AC supply systems with earthed center point
Assigned motor power at 575/600 V, 60 Hz, 3-phase	25 HP
Braking resistance	33 Ω
Equipment heat dissipation, current-dependent Pvid	555 W
Heat dissipation capacity Pdiss	0 W
Heat dissipation per pole, current-dependent Pvid	0 W
Input current ILN at 150% overload	32.2 A
Braking torque	Max. 100 % of rated operational current Ie, variable, DC - Main circuit Max. 100 % of rated operational current Ie with external braking resistor - Main circuit Max. 30 % MN, Standard - Main circuit
Cable length	100 m, screened, maximum permissible, Motor feeder 150 m, unscreened, maximum permissible, Motor feeder 300 m, unscreened, with motor choke, maximum permissible, Motor feeder 200 m, screened, with motor choke, maximum permissible, Motor feeder
Functions	4-quadrant operation possible
Output voltage (U2)	600 V AC, 3-phase 500 V AC, 3-phase
Number of inputs (analog)	2
Number of inputs (digital)	5
Number of outputs (digital)	2
Starting current - max	200 %, IH, max. starting current (High Overload), for 4 seconds every 40 seconds, Power section
Number of phases (input)	3
Number of relay outputs	2 (parameterizable, 1 N/O and 1 changeover contact, 6 A (250 V, AC-1) / 5 A (30 V, DC-1))
Number of phases (output)	3
Power consumption	555 W
Rated control supply voltage	10 V DC (Us, max. 10 mA)
Efficiency	97 % (η)
Rated control voltage (Uc)	24 V DC (external, max. 100 mA)
Supply frequency	50/60 Hz
Leakage current at ground IPE - max	28 mA
Mains voltage - max	600 V
Mains voltage - min	500 V
Nominal output current I2N	28 A
Number of HW-interfaces (industrial ethernet)	0
Number of HW-interfaces (other)	0
Number of HW-interfaces (parallel)	0
Number of HW-interfaces (RS-232)	0
Number of HW-interfaces (RS-422)	0
Number of HW-interfaces (RS-485)	1
Number of HW-interfaces (serial TTY)	0
Number of HW-interfaces (USB)	0
Number of interfaces (PROFINET)	0
Number of outputs (analog)	2
Output at linear load at rated output voltage - max	18.5 kW
Output at quadratic load at rated output voltage - max	18.5 kW
Output frequency - max	500 Hz
Output frequency - min	0 Hz
Output voltage - max	600 V
Overload current IL at 150% overload	42 A
Suitable for	Branch circuits, (UL/CSA)
Switching frequency	8 kHz, 4 - 24 kHz adjustable (audible), fPWM, Power section, Main circuit
Rated operational voltage	600 V AC, 3-phase 500 V AC, 3-phase
Short-circuit protection rating	50 A, UL (Class CC or J), Safety device (fuse or miniature circuit-breaker), Power Wiring
Rated frequency - max	62 Hz
Rated frequency - min	48 Hz
Rated operational current (Ie) at 150% overload	28 A
Rated operational current for specified heat dissipation (In)	28 A
Rated operational power at 500 V, 50 Hz, 3-phase	18.5 kW
Safety function/level	STO (Safe Torque Off, SIL2, PLc Cat 2)
Short-circuit protection	LPJ fuse used together with J60060-3 fuse base, Power wiring, Assigned switching and protective elements NH fuse used together with TB00-D fuse base, Power wiring, Assigned switching and protective elements
Heat dissipation at current/speed	165 W at 25% current and 50% speed 167 W at 25% current and 0% speed 192 W at 50% current and 0% speed 212 W at 50% current and 50% speed 231 W at 50% current and 90% speed 301 W at 100% current and 0% speed 334 W at 100% current and 50% speed 396 W at 100% current and 90% speed

为合作而设

查询可适配本产品的其它伊顿产品或部件。

176966

常用规格

产品规格

导出产品规格

Installation videos

产品手册

产品样本

图纸

应用程序说明

为合作而设